Specifications

26
5 Menus and settings (continued)
5.4 Service management (cont.)
Service selection, LCN settings
Before starting, ensure that you
have selected the correct [Logical
channel type] in the Network
settings submenu.For setting the
LCN (Logical Channel Number)
you click on the [Edit] icon under
the column named [LCN]. Then
you will see a new window where
you can write the actual Logical
Channel Number (LCN) or/and
HD LCN.
NOTE! LCN /HD LCN shall only be set
in EXM units with outgoing muxes. LCN
is not supported in all DVB receivers i.e.
refer to your manufacturer for
specification for the DVB receivers in
your cable TV network. All EXM units
has to be interconnected to a switch to
make the LCN /HD LCNto work
properly.
Network settings
Click the [Network settings] menu to
display the Network settings menu. Here
you can write [Network Provider Name],
[Network ID], [Original Network ID],
[TransportStream ID] and select [Logical
channel type]. When one or more choices
has been made, you have to click on
[Save settings] to store your settings. The
DVB standard recommends following
Network ID ranges:
DVB-S: 0 to 8191 (0 should be avoided)
DVB-T: 8193 to 13568(Boxer in Sweden
use 8945)
DVB-C: 40961 to 65281 (ComHem in
Sweden use 41001 and up)
NOTE! To make Network search to work on STB:s
(Set Top Boxes) that are connected to the cable TV
network you must have all EXM units
interconnected to a switch and also assure that the
Original network ID and the Network ID is set to the
same value in all EXM units with outgoing muxes.
English