Specifications

25
English
5.4 Service Management
Service selection
The Service selection menu gives an
overview of available services from
tuner or IP in and/or the ASI input (if
enabled). Remultiplexing (remuxing)
is possible after downloading an
appropriate SW option. To build your
own MUX you combine several
incoming services. Just click in the
dialog boxes for chosing a service as
Digital out and/or Analogue out. If a
chosen service is encrypted you click
in the CI box for decryption. When a
choice is made the dialog box
change to green colour.
In the CI source scroll list you
choose if decryption on services
coming from tuner or ASI in.
The ASI output automatically
contains the services you have
selected for [Digital output].
NOTE! To decrypt more than one service
requires a sw option that include remux and
a multidecryption CA module and a
smartcard that is activated for more than
one service. Some smartcards can handle
three or more services at a time. Please
refer to your smartcard service provider and
or program provider for further information.
In this menu you can also see the
actual (instantaneous) “Payload
bitrate” and the “Configured bitrate”.
This helps you to avoid overload for
the output (see page 35 and 36 for
information).
By a click on the [Edit] icon you can
do settings or changes for Service
name, Service ID (SID) , LCN or HD
LCN. By the icon to the right ( )
you can restore to default value.
5 Menus and settings (continued)
The red colour of the CI
box indicate that CI
source is tuner i.e. no
decryption can be made
on services from ASI in