Specifications

20
English
5.3 Output settings (continued)
Analogue mode
The selection [Analogue] is set as
factory default as RF output .
Country specific settings can be
done by selecting [Country]. By
selecting a specific country,
transmission standard and
languages are automatically preset.
[Audio language] gives you the
choosen language if there is more
than one language in the received
signal.
[Audio level] can be adjusted
between +3 to -9 dB.
[Subtitling type], [Subtitle priority]
and [Subtitle charset] can be
selected as well as [Subtitle
conversion] and [Subtitle WSS].
5 Menus and settings (continued)