Specifications

19
5.3 Output settings (continued)
Selection of Output MUX
In the Output menu there is an new “click box” where you click to select an unit as an
“Output MUX unit”. This means that by choosing all units with COFDM or QAM as
output, those units will exchange all necessary information to build correct tables for
NIT, SDT and EIT. In units that is not chosen as Output MUX, this information is not
sended out through the connected switch to other units.
NOTE1 All units must be interconnected through a switch to get this [Output MUX
selection] to work correct ( SI information is sent on port 16000).
English
5 Menus and settings (continued)