Specifications

1818
English
5 Menus and settings (continued)
5.3 Output settings
ASI mode
The output selection ASI disables all RF modulation on the outputs and all selected
services will be transmitted only through the ASI output connector. ASI is a high speed
interface for digital TV transport streams. Use this output mode if you run IPTV out.
Under [Configure bitrate] you can select the output bitrate which is the maximum
bitrate for both ASI in
1)
and for ASI out . After choosing output you must click on “Set”
NOTE! With Basic functionality the bitrate of ASI output will be the same as the bitrate
at the tuner input.
1) Sw option with remux needed to get the ASI input functionality.