Specifications

English

5 Menus and settings (continued)

5.2.c Input settings, ECX-200

Select [Modulation], [Symbol rate] and the [Channel name] or enter the

[Transponder frequency] (in MHz).

Press [Set] to save settings.

A list of the available services from the multiplex you tuned to, will be shown

on the right hand side and also available services via the ASI input.

Below [Tuner settings] information of the received signal is displayed.

Note! We recommend that the input level is better than -45dBm and that the

C/N is better than 36 dB (QAM64).