Specifications

English

5 Menus and settings (continued)

5.2.a Input settings ESX-200

Select the modulation type you want to receive. If you choose DVB-S2 you also

can select between QPSK, 8PSK or 16 QAM.

Choose fixed or universal LNB. Set the Polarisation. Voltage, FEC and 22 kHz

tone you normally set to “Auto” if you have connected the EXM unit to an

Universal LNB or a switch with same functionality as a Universal LNB. You can

also select DiSEqC type switch

(4 ports) and what port to connect to.

Finally enter the correct Symbol rate and click on [Set] and then enter the

Transponder frequency and click on [Set]. The available services are listed to the

right.

We suggest that you consult: http://en.kingofsat.net/ or another web site for

correct parameters for the services you intend to use.

The input level should be higher than -65 dBm, preferably more than -50 dBm

and max -25 dBm and C/N should read more than 10 dB.

If only “ASI in” is used you can “Disable” the tuner.

Note! Inverted spectrum is sometimes used in C-band transmissions and is set

automatically by auto detection.

To continue with settings click on [Input] name in the banner.