Specifications

12
5.1.b Overview menu, Installation Overview
In this menu you can see all units that are connected together in a Head End. You
can see information of IP address, serial numbers, Firmware version, Input, Output,
ASI source, NID, TSID and Uptime. On the left side of the [IP Address] you will have
a symbol for all units that’s selected as “Output MUX” units. Output MUX units
means that those units send, over IP (through the switch), information regarding NIT,
SDT and EIT.
Sorting can be done for IP address or for NID (Network ID).
NOTE! All units must be interconnected through a switch to get this Installation
Overview to work correct.
Symbol showing that this is an “Output MUX” unit
5 Menus and settings (continued)
English