Installation guide

44
Following components are included in the package:
Amount Description
1 ECX-200 Cable Processor
1 Installation guide
2 Front panel screws
NOTE! There is no SW CD, nor any Control Software CD. The unit is delivered
with all necessary SW embedded including web server for control and settings
of the unit.
Every unit is quality controlled by us before delivery. Should any items be
missing when unpacking, please contact our support service (see page 3 for
contact info).
English
2 Unpacking the unit
Important information about power
supply to ECX-200
To avoid problems with ECX-200 and/or
EPP-100 it is very important that both
DC plugs on the EXM power cord are
inserted into the EPP-100, i.e. each
EXM unit needs to be fed from two DC
outputs at the rear end of EPP-100.
(See picture to the right).
NOTE! Never connect two EPP units to
feed one ECX-200