Installation guide

22
English
ECX-200 #4 ECX-200 #5 ECX-200 #6
192.168.10.24 192.168.10.25 192.168.10.26
ASI
ASI
VSB RF
out
VSB RF
out
QAM
out
As you can see, the Network ID and the Original Network ID (ONID) is the same as in
the units in MUX #1. The only difference is that all units in this Mux has other
Transportstream ID than in MUX #1 (here also chosen as the last digits in the IP
address).
When building a third Mux you use the same settings i.e. same Network ID and ONID
but different Transportstream ID.
NOTE! All three units has SW option EXM-RC.
6.2 Configuration examples: Network settings QAM out, Mux #2
6 Installation and Configuration examples (cont.)