Installation guide

1515
4 Settings (continued)
English
4.3.5 LCN settings
Before starting, ensure that you
have selected the correct [Logical
channel type] (see page 14).For
setting the LCN (Logical Channel
Number) you click on the [+] sign
under the column named
[Options]. In the box under the
label [Logical channel number]
you write the LCN number you
want for the service you have
chosen and click the [Set] button.
NOTE! LCN shall only be set in
EXM units with outgoing muxes.
LCN is not supported in all DVB
receivers i.e. refer to your
manufacturer for specification for
the DVB receivers in your cable
TV network. All EXM units has to
be interconnected to a switch to
make the LCN to work properly.
4.3.6 Upload
Update of the ECX-200 firmware or
upload of enhanced functionality is
done via the Upload menu.
NOTE! Always read the Instructions
carefully before starting an upgrade.
Select [Browse] and search for the
correct file on your computer. When
the file is selected press [Upload]
and the file is uploaded into the
ECX-200. When upload is ready
you should get a message “Upload
completed”. Always do a power
reset or web reset after finished
upload to ensure that the ECX-200
reboots with the uploaded software.
Please refer to the
“Upgrade
instructions” for each specific SW.