Datasheet

Lithium-ion Battery Series
DOC NO：SDJG/C- LI-PS201
REV ： R1.0
PAGE： 8 of 9
8
Appendix A
Suggestions for Battery Packs
1、Selecting principle of nickel strip is often applied to the design of battery packs.
Based on the working current of battery packs to make the shunt selection of nickel strip. The common
nickel strip could under the current as below:
Nickel Strip Type
3*0.1
4*0.1
7*0.15
8*0.15
Normal Working Current
2A
3A
7A
8A
Maximum Continues Current
4A
5A
13A
15A
2 、 Relation between the battery packs design current and lead wires current breakdown, and
principle of wires selection.
Based on the working current of battery packs to make the shunt selection of wires. Different wires
could under the current as below: