User Guide

Enter 42 then the zone number(s) that are required. As a zone is entered that zone led will
light.
Enter 42. The zone(s) led will go out.
TO REMOVE ACCESS ZONES
As above enter 42. then the zone number(s) that are required. As a zone is entered that
zone led will go out.
Enter 42. The zone(s) led will go out.
SOAK TEST ZONES
In ENG MODE
Enter 45 then the zone number(s) that are required. As a zone is entered that zone led will
light.
Enter 45. The zone(s) led will go out.
REMOVE SOAK TEST ZONES
In ENG MODE
Enter 45 then the zone number(s) that are required. As a zone is entered that zone led will
go out.
Enter 45. The zone(s) led will go out
ZONE PAIRING
In ENG MODE
Enter 46 then the zone numbers that are required. As a zone is entered that zone led will
light.
Enter 46. The zones led will go out.
REMOVE ZONE PAIRING
In ENG MODE
Enter 46 then the zone numbers that are required. As a zone is entered that zone led will
go out
Enter 46. The zones led will go out.
PROGRAMME PART SET ZONES
In ENG MODE
Enter 44 then the zone numbers that are required. As a zone is entered that zone led will
light.
Enter 44. The zones led will go out.
DE-ACTIVATE PART SET ZONES
In ENG MODE