User Guide

Enter 04
(auto re-arm is now off)
SILENT P.A. (factory set at all sounders)
In ENG MODE
Enter 11
(silent P.A. will still operate the communicator relay)
AUDIBLE P.A. (factory set at all sounders)
In ENG MODE
Enter 01
(sounders now ON)
ENGINEER RESET ONLY
In ENG MODE
Enter 15
CUSTOMER RESET
In ENG MODE
Enter 05
PROG. ENGINEER CODE
In ENG MODE
Enter 41
Four led’s lit
Enter new code
TO PROGRAMME A ZONE THAT CUSTOMER CANNOT OMIT
In ENG MODE
Enter 47
Then the zone no. required. The respective led will light as each zone is entered.
Re-enter 47
TO ENABLE CUSTOMER TO OMIT ZONES PREVIOUSLY INHIBITED
In ENG MODE
Enter 47
Then the zone no. required. The respective led will go out as each zone is entered.
Re-enter 47
TO PROGRAMME ACCESS ZONES
In ENG MODE