User Guide

If a mistake is made in programming, press the RESET key twice and start again.
ENTRY TIME
Enter Eng Mode
Enter 30
Two LED’s show (indicating that two keys are to be pressed)
Enter new time in seconds (01=10sec; 02=20sec and so on).
EXIT TIME
In ENG MODE
Enter 31
Two LED’s show (indicating that two keys are to be pressed)
Enter new time in seconds (01=10sec; 02=20sec and so on).
BELL TIME
In ENG MODE
Enter 21
Two LED’s show (indicating that two keys are to be pressed)
Enter new time in seconds (01=5min; 02=10min and so on).
BELL DELAY
In ENG MODE
Enter 20
Two LED’s show (indicating that two keys are to be pressed)
Enter new time in seconds (01=2min; 02=4min and so on).
SPEAKER DURATION
In ENG MODE
Enter 23
Two LED’s show (indicating that two keys are to be pressed)
Enter new time in seconds (01=5min; 02=10min and so on).
SPEAKER DELAY
In ENG MODE
Enter 22
Two LED’s show (indicating that two keys are to be pressed)
Enter new time in seconds (01=2min; 02=4min and so on).
AUTO RE-ARM ON (factory set on)
In ENG MODE
Enter 14 ( system will re-arm when bell stops)
AUTO RE-ARM OFF
In ENG MODE