Operation Manual

In Speed and Cadence settings, the icon next to the sensors name is to indicate the status of the
connection to the sensor.
Tap on a sensor, then select ‘OK’ ( ) from the popup dialog to connect and select ‘No’ to just
select it.
Tap on a sensor, then select bin icon ( ) to forget the sensor.
Selecting a sensor and tapping on the settings button ( ) will bring up the settings menu.
This menu contains options for changing the name of the sensor.
TEASI PRO & TEASI ONE
3
& TEASI ONE
3
X
SAC – Speed Sensor Calibration. In this menu, also the wheel settings can
be calibrated. Tap on the name of the sensor to rename it and on the rim /
wheel circumference to set them.
The ‘Rim’ button gives you the possibility to select a standard rim, which
will set an average value for the wheel circumference. You can still adjust
the correct size of the circumference, by manually enter the exact value
inside the ‘Wheel Circumference’ field.
‘Wheel Circumference’ is used to calculate correctly the speed from your
Speed sensor.
Renaming the sensor:
Tap ‘OK’ ( ) to set the new name or back
button to cancel.