Operation Manual

In HR settings, the icon next to the sensors name is to indicate the status of the connection to the
sensor.
Tap on a sensor, then select ‘OK’ ( ) from the popup dialog to connect and select ‘No’, to just
select it.
Tap on a sensor, then select bin icon ( ) to forget the sensor.
Sensors can be renamed by tapping on the sensor, then tapping on the edit
button ( ).
3.9.5.5 Speed and Cadence (SAC) sensor Settings
Tapping on ‘SAC’ in Settings will show a list with the previously paired
sensors.
Note: if Bluetooth or SAC category sensors were disabled, the device will
notify the user and prompt if settings should be changed for an enabled
Bluetooth and sensor feature.
This list is grouped and ordered based on the range of the sensor and
its last known connection date.
The first item would be a connected and present sensor. If there is no
connected sensor, the sensors in range will be shown and under them
the sensors that are paired with the device, but are not in range.
These list items will be further ordered by the date of last connection,
so the latest sensor will be found at the top.
If there is not any paired sensor yet, new ones can be connected by tapping the plus sign on the
bottom of the screen.
After tapping the plus sign, the available sensors in range will be shown.
Note: a sensor that is not in range during the attempt, will not be shown in the list, thus pairing won’t
be available.