Operation Manual

Tap on an E-Bike, then select ‘OK’ ( ) from the popup dialog to connect and select ‘No’ to just

select it.

Tap on an E-Bike, then select bin icon ( ) to forget the E-Bike.

3.9.5.4 Heart Rate Sensor Settings

TEASI PRO & TEASI VOLT & TEASI VOLT BT

& TEASI ONE

Tapping on ‘Heart Rate’ in Settings will show a list with the previously paired sensors.

Note: If Bluetooth or Heart Rate category sensors were disabled, the device will notify the user and

prompt, if settings should be changed for an enabled Bluetooth and sensor feature.

This list is grouped and ordered based on the range of the sensor and its

last known connection date.

The first item would be a connected and present sensor. If there is no

connected sensor, the sensors in range will be shown and under them the

sensors that are paired with the device, but are not in range.

These list items will be further ordered by the date of last connection, so

the latest sensor will be found at the top.

If there are not any paired sensors yet, new ones can be connected by

tapping the plus sign on the bottom of the screen.

After tapping the plus sign, the available sensors in range will be shown.

Note: a sensor that is not in range during the attempt, will not be shown in

the list, thus pairing won’t be available.