Operation Manual

3.9.5.3 E-Bike
TEASI VOLT BT
Teasi Volt Bluetooth allows you to connect to your E-Bike via
Bluetooth.
Tapping on ‘E-Bike’ in Settings will show a list with the previously paired
bicycles.
Note: if Bluetooth or E-Bikes were disabled, the device will notify the user
and prompt if settings should be changed for an enabled Bluetooth and
sensor feature.
This list is grouped and ordered based on the range of the E-Bikes and
their last known connection date.
The first item would be a connected and present E-Bike. If there is no
connected E-Bike, the E-Bikes in range will be shown and under them the
E-Bikes that are paired with the device, but are not in range.
These list items will be further ordered by the date of last connection, so the latest E-Bike will be
found at the top.
If there is not any paired E-Bike yet, new ones can be connected by tapping the plus sign on the
bottom of the screen.
After tapping the plus sign, the available E-Bikes in range will be shown.
Note: an E-Bike that is not in range during the attempt, will not be shown in the list, thus pairing won’t
be available.
In E-Bike settings, the icon next to the sensors name is to indicate the status of the connection to
the E-Bike.