Operation Manual

If ‘Yes’ is selected, the Route Options are shown for ski account settings:
on this page the route settings such as experience level and type of ski can be set.
Here you can select the type of the skiing: Downhill, Nordic, Ski Tour.
Experience level can be set, so that you will be routed only on the
preferred types of pistes.
NoviceGreen slopes allowed
EasyBlue slopes allowed
IntermediateRed slopes allowed
AdvancedBlack slopes allowed
ExtremeExtreme (yellow and expert) slopes are allowed
For example: If the user sets the minimum experience level to ‘Easy’ and the maximum to
‘Advanced’, then only blue, red and black pistes will be considered.
If the user sets both levels to ‘Intermediate’, then only red pistes will be considered.
Not only pistes, but ski lifts can be taken out of routing (for example ski
lift is not working currently because of weather issues / seasonal
reasons).
For this, POI details of a Ski lift should be opened and ‘Use in route
planning’ should be unchecked.
On map screen the POI will change when disabled:
Ski lift enabled: Ski lift disabled: .
Every day, after first startup from power off / suspend, if there were
disabled ski lifts present, the device asks, whether Ski Lifts should be re-
enabled:
If ‘Yes’ is selected, every disabled ski lift is enabled again.
If ‘No’ is selected, the previous settings are kept.
Enabling Ski Lifts again can be done from ‘Route Options’ menu also.