Operation Manual

Power management
Power management is for saving power for the device. If no movement is detected and there is
no ongoing recording, the device will ask whether to suspend or power off after the set time
(default is 10 minutes).
Suspend popup:
If suspend is chosen, the device will go to sleep mode, so that the
ongoing recordings and processes will be paused, but they can be
continued by waking up the device via the power button. If power
off is selected, these processes will be ended, for example a
recorded track will be saved with and end point where the device
has been turned off.
Swipe function
Swipe function is the right tool for fast and accurate navigation
inside our software. This function allows the user to get back to
previous screen(s) easily.
The method is to tap on the top of the screen and with a pulling
move, move down until previous screen is reached.
Swipe function is by pulling down the previous screen from the top.
If you decide to stay on the same screen, just don’t finish but
reverse the movement.
Note: This function is disabled on the main screen.