Operation Manual

In this screen, Bike Weight can be set and gear settings can be
configured.
Derailleur and hub gears are both available. If using e-bike with
derailleur, select ‘Derailleur’. If using e-bike with hub gear (such as
Shimano Nexus 7 and 8) select ‘Hub’.
When Derailleur settings are in use, Derailleur type can be changed by
tapping . This will show the available Derailleur
types (based on the number of rear cassettes).
Selecting a type will set the rear cassette settings described under the list
element.
Cassette teeth numbers can also be adjusted one by one by tapping:
When rear cassette settings are modified, the Derailleur type will be set
to ‘Custom’.
Selecting a type will set the hub settings described under the list
element. Gear ratios can also be adjusted one by one by tapping:
When hub settings are modified, the Derailleur type will be set to
‘Custom’. In cases of both types (Hub and Derailleur), also the front
cassette number and the individual teeth number for cassettes can be
set by tapping:
When there are multiple front cassettes (available only with derailleur, the
cassettes should be configured so that the smallest teeth number comes
as first, the biggest comes last.