Operation Manual

5. To activate a profile:
1. Tap on the profile.
2. Select OK ( ) to close the screen.
To delete a profile:
1. Tap on the profile.
2. Select the Pen button to edit profile ( ).
3. Tap on the bin icon to delete ( ).
4. Select ‘Yes’ in the upcoming confirmation query.
For each profile, you can set a Name, Weight, Bike Weight,
bicycle/pedestrian type by tapping on each field.
Pressing arrow buttons, you can define other parameters for your
account, like the road preferences you would like to be used when a route
is calculated.
Furthermore, advanced routing settings can be done in the last page of
this menu on ‘Advanced Route settings’:
In Advanced Route Settings, the navigation mode can be selected -
Turn By Turn, or Beeline. Turn by turn gives the normal navigation, where
every turn is instructed and beeline shows the direction straight to the
destination.
Also, one-way streets can be used by bicycle. For this, select ‘Both ways’.
3.9.4.1 Bike Pairing and Configuration
TEASI VOLT & TEASI VOLT BT
Pairing E-Bike to an account happens under SettingsAccounts.
When E-Bike is connected and pairing has not happened yet, pairing can be started by pressing the
following button:
E-Bike configuration can be done under AccountsBike Configuration. In this menu, gear and
speed sensor settings of the E-Bike can be calibrated.