Operation Manual

3.9.2 System
TEASI ONE & TEASI VOLT & TEASI VOLT BT &
TEASI ONE
3
& TEASI ONE
3
X
In System, the units can be changed.
Tap on ‘Metric’ to use metric system and tap on ‘Imperial’ to use the
imperial.
The timer for Suspend mode can also be set here:
tap on the slider and move it to the desired value,
press OK ( ) button to accept the changes.
Note: If Units settings are disabled, Nautical settings are in use. To disable
nautical settings and enable Metric / imperial, go to Account Settings.
3.9.2.1 Easy Mode - Full Mode
Easy mode contains only the essential features: Map, Destination,
Memory and Settings (where full mode can be set).
Easy mode can be selected by ‘Change to Easy Mode’ when device is set
to Full Mode and Full mode can be set by tapping ‘Change to Full Mode’
when device is set to Easy mode.
Full mode contains all features of the Teasi One device.
Note: When easy mode is selected, new profiles cannot be added and
existing profiles cannot be deleted.
If Create and Edit options are not enabled in ‘Accounts’, Normal mode should be reactivated in
Settings  System  ‘Change to normal mode’.