Operation Manual

When an ‘X’ ( ) is shown next to a category, it will not be displayed
on map.
Third and last page contains Clean up Maps and Raster map feature.
Clean Up Maps is a feature to delete maps on the device, making free
space for any needs on the go.
Under the status bar, on the top of the screen is the free space
presented both on device and memory card.
Under the free space indicator, you can find a list of installed countries.
Select the countries to be deleted by tapping them once. If the bin is enabled on the bottom of the
screen, the countries marked by ‘X’ ( ) will be deleted after a prompt question in a pop-up box.
Select yes on the box to confirm deletion. At least one country has to be present, therefore it will
not be possible to remove all the countries.
Raster maps can be used by checking the ‘Use Raster Maps’ checkbox and by selecting valid
sources. Open ‘Select Sources’ and select a raster map to be used (selected maps are dark gray).
Pan on map screen to the affected area to see the difference made by the feature.
Note: Raster maps on SD card will be loaded on Software startup. If SD is inserted, but raster maps
are not visible, please restart the device! Supported Raster Map format is MBTiles. Quality raster
maps are provided by KOMPASS and MagicMaps.
For creating own raster maps, please visit: http://www.teasi.eu/fileadmin/redaktion/mbtiles/Teasi-
Tech-Tipp-MOBAC_EN.pdf