Operation Manual

3.9 Settings
Affects all models
Inside the Settings menu you have the possibility to choose your preferred configuration to live the
best experience with your Teasi device.
3.9.1 Maps & Clean Up Maps
In Maps, three pages of features can be fine-tuned for efficient
optimization.
The first page contains settings regarding zoom and orientation.
The ‘Auto Zoom’ can be turned on or off, thus enabling automatic
zoom.
Orientation can also be decided: Checking ‘Head up’ allows the device
to always turn the map to the heading, while unchecking it keeps the
map with north on the top of the screen.
When snapping is enabled, the cursor will be snapped to the track in
the event of navigation on a track. This way the noise of the signal is
reduced on the GUI so progress can be seen in a more demonstrative
way.
Note: The recording itself would contain the original signals, so the movement of the location cursor
and the red line of recording might differ.
To see the unfiltered position, disable the snapping feature.
Navigational pop-up informs about next turn when map screen is not
visible.
To disable these pop-ups, uncheck the option in the menu.
On the second page of map settings are placed the settings of
displaying favorites and POIs.
The display of each item can be set by its individual ‘Show on map’
button ( ).
For Map and Imported POIs the shown categories are also selectable by
the ‘Select Categories’ button ( ).