Operation Manual

When the ‘Add another destination’ button is pressed, the Waypoint
list is shown with the previously set destination as first item of the list
(thus the first destination to reach).
Any further destination will be added to the waypoint list. This way,
the list will contain all set destination in a manageable way.
Another destination can be added by tapping on this button:
This will bring up the Destination screen again. Any type of target
location selected will be added to the list as next item and routing
(if there was an ongoing navigation) will now be calculated further,
navigating to the new endpoint.
Note: Adding route to Multiple Destination is not supported. Currently up
to 7 items can be added to Multiple Destinations. Tapping on an item will
select it for manipulation in the list.
The selected destination can be moved up ( ) or down ( )
or can be deleted from the list ( ).
If there is no destination selected and ‘Delete’ ( ) is pressed, the
list will be emptied.
If there was an ongoing navigation first it will be stopped, the list can be cleared.
Note: Already reached destinations cannot be manipulated.
When there is more than one destination point in the waypoint list, the ‘calculate route’ ( )
button is present. Pressing this button will show the calculated route between the first and the last
point.