Operation Manual

3.6.5 Coordinates
In the Coordinates menu, you can manually insert the coordinates of
your target destination.
Enter the Latitude coordinate inside the ‘Latitude’ field.
You can change between North and South with the ‘N/S’ button.
Enter the Longitude coordinate to the ‘Longitude’ field.
You can change between East and West with the ‘E/W’ button.
Multiple coordinate formats can be inserted:
Degrees, minutes, seconds: 40° 25’ 46” N 79° 56’ 56” W
Degrees, decimal minutes: 40° 25.767’ N 79° 56.933’ W
Decimal degrees: 40.256° N 76.962° W
Coordinates can be entered in one of the three formats. Virtual keyboard will adapt to the format
during the input.
For example, if decimal degrees are to be used, use punctuation after the degrees and ° as closing
item for the coordinate.
If you want to add the minutes or seconds instead of fraction of degrees, ’ (after minutes) and ”
(after seconds) should be used.
When you have entered the coordinates, the ‘Start Navigation’ screen will be displayed, as already
explained inside the Address Search.
3.6.6 Tours
You can also search your Tours, by selecting the Tours icon inside the
Search menu.
A list will appear with your saved tours, both local and imported ones.
Tours can be ordered by distance ( ) (the shortest will be on top),
or by time ( ) (most recent search will be on top).
They can be also erased by the bin icon ( ).
When you have selected your desired item, the ‘Start Navigation’ screen
will be displayed, as already explained inside the Address Search, but
with some further possibilities to customize the tour.