Operation Manual

6
TEASI ONE & TEASI VOLT & TEASI VOLT BT &
TEASI ONE
3
& TEASI ONE
3
X
Teasi One, Teasi Volt and Teasi One
3
has 2 hardware buttons on the side of the devices.
The lower button is responsible for switching on and off the device and for locking the screen.
The upper button is responsible for getting back in the menus or getting to an upper level of the
menu system.
In case of Teasi One, the menu will pop up by pressing the lower
button long, allowing the locking or the powering on or off.
In case of Teasi Volt, Teasi Volt BT, Teasi One
3
and Teasi One
3
Extend, the menu will pop up by pressing the lower button long,
allowing the locking or the powering on or off and switching off
Bluetooth (when on).
To reset your device, press and hold power button for at least 15
seconds, until the screen is completely black. After device is turned
off, it can be turned on again.
When the screen is locked, no input can be taken besides pressing
the power button again to unlock the screen or switch the device off. Under locked screen, every
navigation and process continues to run.
Most of the application flow is handled directly on the screen.