Operation Manual

TEASI VOLT & TEASI VOLT BT
When the desired address is selected, a Destination - GO screen is displayed with preliminary route
information and Current Assist Level - the base of this calculation. When Current Assist Level is
changed, the new calculated route is shown with the changed assist level.
A colored line under the altitude graph will display the battery charge evolution during the course
of the navigation.
When Destination cannot be reached with current battery level,
the unreachable part of the elevation graph will be shown in red,
with an empty battery icon as indication. If you still press ‘Go’, you
will be warned to have problems reaching your destination:
Selecting ‘Yes’ will start navigation and selecting ‘No’ will make
new destination selection available. On the upper side of the
screen, the selected address and the distance is calculated. Until
the distance is calculated the beeline, distance is displayed. A
graph with the altitude outline will be shown after calculation.
Note: Teasi is able to calculate routes that are far not more than 300 km (beeline) from your current
position. If the beeline distance is above 300 km, then you will be warned.
Teasi application proposes three alternative routes.