Operation Manual

How to import tours manually:
Connect the Teasi device to a computer. Create a folder on the device inside the BikeNav folder
called ‘ImportedTrips’, if not already existing. All imported tours must be placed here
(‘BikeNav\ImportedTrips’) to be able to see them on the Teasi device.
How to import tours from SD card:
Open the SD card on your computer. Create a folder on the SD card inside
the BikeNav folder called ‘ImportedTrips’, if not already existing. All
imported tours must be placed here (‘BikeNav\ImportedTrips’) to be
able to see them on the Teasi device.
On the bottom of the screen you can choose the sorting method by
alphabet ( ), reverse alphabet ( ), or by distance ( )
(this way the shortest route will be on top).
You can browse the list via the up and down arrows that are only
available if the list contains at least 9 items.
The tours are recorded with the timestamp as a name, so they can be
easily identified later.
Tap on a tour to see its details and modify it. On the first tap, it will be
shown on the map.
To change its name and type, tap on the name on the top of the
screen. After changing the values OK ( ) commits your changes.
On the bottom of the details screen there are additional options.
With the arrows ( and ) you can see further data about the
track, with the ‘Go’ button
( ) you can start navigation to the track and with the bin icon ( ) you can erase the track.
When an imported track is presented with an icon with a green number on it ( ),
it means the track is a TEASI Tour track, that contains additional data compared to a regular track,
such as POIs with Pictures and descriptions.