Operation Manual

3.9.8 Sound
In Sound settings, you can set certain settings connected to sounds.
If you want Teasi to emit a sound when you tap over the screen, then
select the ‘Screen’ option.
If you want a warning beep when a navigation instruction is
approaching, then select the ‘Navigation’ option.
Sound frequency can also be set here from 950 Hz to 3500 Hz.
If you want to lower the pitch of beeping, move the slider to the left.
To set a higher pitched beep, move the slider to the right.
3.9.9 Screen
The Screen settings contain options related to skin, brightness, timer
and screen calibration.
The skin selector is to change between ‘Dark’, ‘Light’ and ‘Auto’
skins, for different lighting conditions.
Auto feature changes the ‘Dark’ and ‘Light’ skins based on the sunset
and sunrise based on the devices actual GPS position and time
settings.
In Screen, two different brightness settings can be changed by
moving their slider.
The slider presented by the icon: is the standby brightness.
The slider presented by the icon: is the operational brightness.
The timers for the Backlight can also be set here: tap on the slider and move it to the desired value,
then press OK ( ) button to accept the changes.
Screen calibration can also be started from here. After tapping on ‘Start’ Screen Calibration, please
tap on the cross lines firmly. The procedure will repeat until the calibration is successful.