User Manual Upper-arm Wireless Blood Pressure Monitor Thank you for choosing an a-rival product. A good choice. Just in case that you are facing any problems with your device, please call our support/service hotline +49 (0)511 / 123 83 506, send us an e-mail to support@first-servicecenter.de or visit us on http://a-rival.de/facebook/ Updates and news available on our website www.a-rival.de.
Content Introductions 1 Preparation 5 1.1 Safety precautions 1.2 Composition of product 1.3 Name of components 2 Measuring 9 2.1 Blood pressure measuring 2.2 Application method of blood pressure monitor 3 FAQ & Maintenance 12 3.1 Q&A for blood pressure measurement 3.2 Error display 3.3 Queries 3.4 Maintenance and storage 3.
Please read this manual carefully before you use this unit, and keep it well for further checking.
Introduction Thank you for purchasing and using the series products of a-rival blood pressure monitor. In order to ensure safe usage of this product and make it to be your best assistant for daily blood pressure management, we advise you to read this manual carefully before using the monitor. Please take care of the attached warranty card. This compact and convenient monitor is an ideal device for people who need to capture their blood pressure frequently.
1 Preparation 1.1 Safety Precautions Since the self-judgment and self-treatment based on the measurement results are dangerous, please follow the doctor’s instructions. Self-judgment might possibly lead to exacerbation of diseases. Diabetes, hyperlipidemia and high blood pressure, etc. can expedite arteriosclerosis and even lead to peripheral circulation disturbance, etc. Patients with these diseases might have various measuring results of upper-arm blood pressure.
1.2 Composition of product All products have been packaged. Please open the packing cases and make sure whether they are complete.
1.
Status of indicator light Status of power light Connection to external power Non-connection to external power Red light flashing Red light on Green light flashing Green light on Full power (100%) Green light on Green light on Power off Refer to above status Off Low battery voltage (less than 20% of full battery) Battery voltage between 20% and 100% Status of Bluetooth indicator light Connection to external power Power off Waiting to connect to cell phone Connected to cell phone Non-connect
2 Measuring 2.1 Blood Pressure Measuring Blood pressure monitor is controlled by the software application in the phone and measurement results are stored in the phone. It’s suggested to measure the blood pressure regularly every day, like both in the morning and evening. ※ Preparation a-rival software application connects to Bloodpressure monitor via Bluetooth. The a-rival App requires mini. iPhone 4S/iOS 6.0 and above.If you use an Android device you need Bluetooth Smart support and min. Android 4.3.
2.
11
3 FAQ & Maintenance 3.1 Q&A for Blood Pressure Measurement Q: Why the measurement result at home is lower than that in hospital? A: People will get nervous when measuring in hospital. Because people at home is stable in mood, the measurement of blood pressure is sometimes 20mmHg～30mmHg lower than that in the hospital. It’s important to know the normal blood pressure at home.
Q: Why do I get different results after each measurement? A: Do you measure at the same period every day? Measurement after even ten seconds will have a different result. In order to manage the blood pressure correctly, please measure at the same period every day. A: Blood pressure will fluctuate because of various reasons. Even at home the following cases will lead to different results.
Tips of blood pressure Classification standard of blood pressure WHO and ISH have formulated the blood pressure classification in the graph below. It’s measured in the hospital of the upper-arm and different ages. There’s no definition of low blood pressure. But, normally we think people whose high pressure value is not over 100mmHg are low pressure.
3.
The monitor works well and measure correctly. ·The results are higher or lower than that measured in hospital ·Different results every time Other cases Refer to Q&A Reboot and re-measure.
3.3 Maintenance and Storage Please follow the notices in the manual and other correct using ways. If not, we will not bear the responsibility. Maintenance suggestions Do not use volatile oil, diluents and gasoline, etc. to scrub the monitor. Do not wash or wet the armlet. If dirt is found on the monitor, please use dry soft cloth after wringing out the water or neutral solvent as much as possible.
3.4 Specification Product name sQan, Upper-arm Wireless Blood Pressure Monitor Product model OABM01 Display Values displayed on iOS/Android smartphone only Measuring method Oscillometric Measuring range Accuracy Cuff pressure：0 ~ 299mmHg (0kPa~39.9kPa) Pulse rate：40 ~ 200 beats/min Pressure： ±4mmHg (±0.5kPa) Pulse rate：±5% Inflation type Automatic inflation Deflation type Automatic ladder deflation Measuring time Up to 120 seconds Power 3.
Guarantee Please keep the proof of purchase for this device for the entire duration of the guarantee period, as it must be produced in the event of any claim. You (as the end user) receive a 24-month guarantee from the date of sale. The article has been manufactured using the most modern production methods and subjected to strict quality controls. In the event of any defects during the guarantee period please contact the dealer where you purchased it or the manufacturer.
