Operation Manual

SQ-100
P
age
17
4.5 HOW TO USE SMART TRACK BACK
To use track can guide you go back along your training record and make you never get lost.
[MAIN MENU] > [ACTIVITY] > [ACTIVITY INFO]
1. You will see all data you saved, press ‘’ Enter
button’’ to enter.
2. Click ‘’ TRACK BACK?’’ and then press ‘’Enter
button’’.
3. Chose ‘’ Backward’’ or ‘’ Forward’’ to start your
track back. It will take some times to compress
the record in order to optimize the memory
usage.
4. The screen will show map. Sometimes you may
press OK or ESC button to skip or back the
waypoints if you locate the intercross section
you may also go to MENU mode to
NAVIGATION>ROUTES> ROUTES SETTING to
enable AUTO JUMP, if you would like to have
system to recognize the closest point to switch
then.
5. Press ‘’Page button’’ display the distance and
time for you to reach destination on the right part
of screen. The direction of destination waypoint
is shown by the arrow sign of the compass.