Hardwaremanual a-rival P NC 70 Acti ve Hotline +49 (0) 511 / 123 83 506 www.a-rival.de * support@a-rival.de Thank you for choosing an a-rival Navigationsyste m. A good choice. We hope you´ll enjoy using your ne w an a-rival Navigationsyste m. Just in case that you are facing any problem s with your Device, please call our support/service hotline 0049 (0)511 / 123 83 506 or send us an e-mail to support@a-rival.de For Updates and technical infor mation please visit our website w w w.a-rival.
Precautions and Notices . For your own safety, do not operate the controls of the product while driving. . Use this product prudently. The product is intended to be used only as a navigation aid. It is not for precise measurement of direction, distance, location or topography. . The calculated route is for reference only. It is the user's responsibility to follow the traffic signs and local regulations along the roads. .
Table of Contents Precautions and Notices....................................................................................2 1Getting Started................................................................................................4 1.1 Understanding Hardware Features............................................................4 Front and back components.............................................................................4 Top components........................................................
Getting Started 1.1 Understanding Hardware Features NOTE: Depending upon the specific model purchased, the color of your device exactly match the device shown in this manual. Front Components 1 2 Ref 1 2 Component Touch Screen Charge Indicator Description Displays the output of your device. Tap the Screen with your fingertip to select menu commands or enter information. Glows bright amber to indicate that the battery is charging, and turns green when the battery is fully charged.
Top Components 1 1 ON/OFF Switch The main power/battery cut off switch. Side Components 1 2 3 1 2 3 5 Reset Button microSD Slot USB Connector Headphone Connector 4 5 6 Restart system. Accepts a microSD (Secure Digital) card foraccessing data such as Map, Music and so on.
Getting Started 1.2 Connecting to AC Power and Charging the Battery (Optional) When charging the battery for the first time, you should charge it for at least 8 hours. 1. Slide and click the connector converter onto the AC adapter. 2. Connect the adapter cable to the bottom of your device. 3. Plug the AC adapter into a wall outlet. The charge indicator glows red when charging is in progress.
1.3 Using Your Device in a Vehicle A car holder and a car charger are supplied with your device. Using the Car Holder CAUTION: . Select an appropriate location for the car holder. Never place the holder where the driver's field of vision is blocked. . If the car's windshield is tinted with a reflective coating, an external antenna (optional) may be needed to route the antenna to the top of the car through a window. When closing the car window, be careful not to pinch the antenna cable.
Operating Basics 2.1 Performing the Initial Start Up 1. press the ON/OFF button for several seconds. ON/OFF 2. Your device will automatically turn on. Connect the car charger as described in the next section. 3. The opening screen appears. 4. The Main Menu appears as shown below. You can now use your device. 5. Fully charge the battery before using your device for the first time.
2.2 Turning On and Off / sleeping mode 1. Use the ON/OFF button to turn on and off your device. 2. If want to turn off the device, press the ON/OFF button for several seconds. Your device will appearing the next menu of turning off. press 3. If pressing button, the device is turned off. button, the device will enter into sleeping state. When you press the button to turn off the unit, your device actually enters a suspend state and the system stops operating. Once you turn on the system again, it resumes.
Operating Basics 2.4 Main Menu The first time you initialize your device, the Main Menu appears. The Main Menu is your starting place for various tasks. Tap a button to start a task or open other menu. 1 3 Ref Button Name 1 2 3 Navigation Settings GPRS 2 Description For Detailed Information Start navigation Device Settings GPRS Settings 2.5 Inserting a microSD Card Your device has a microSD slot where you can insert an optional Secure Digital storage card.
Inserting a SIM Card Your device has a GPRS function, so you need insert a SIM card. To use a SIM card, insert it into the slot, seeing the below picture. Then please cover the covering. To remove a card, first make sure that no application is accessing the card, then slightly push the top edge of the card to release it and pull it out of the slot. NOTE: When you are not using SIM card slot, please cover the covering to avoid anything enter into SIM card slot.
The Device Settings menu appears as shown above. The following sections describe these buttons and their functions. You can customize the device settings such as backlight, volume, date and time. Once you change the settings, your new settings will remain until you change them again. 3.2 Volume 1. Tap button on the Device Settings menu. The volume function menu appears as shown below. 2. Tap the knob and to adjust the volume. To decrease the volume, tap the knob . To increase the volume, tap the knob . 3.
2. Tap the item of needing to modify, through clicking and on the calendar, accomplish easily to adjustment ,such as: year, month and day. 3. Uniformity, clicking and on the calendar, you can accomplish easily to adjustment of hour, minute and second. 4. Tap the button to save the changes and go back to the previous menu. 3.3.1 Time zone To set the time in your Time zone correctly, tap the Time zone button on the bottom. Your Time zone is pre-set for Germany (GMT +1, see picture below).
3.4 Backlight 1. Tap button on the Device Settings menu. The backlight Devices settings Function menu appears as shown below. 2. Tap the knob to adjust the backlight. To decrease the backlight, tap To increase the backlight, tap . 3.5 Language 1. Tap . button on the Device Settings menu. The Language Function menu appears as shown below. 2. Tap the knob and to select language. 3. After accomplishing, tap the knob to exit. 3.
Devices settings 1. Tap “calibrate” button on the Device Settings menu. The calibrate Function menu appears as shown below . 2. Tap and hold the centre of the target, the target moves to the position of left-up. When again tap and hold the centre of the target, the target moves the Next position of left-down. 3. The target moves to five position (Left-up' left-down' right-up' right-down' Center) in order, forming a period.
This page gives your current position in degrees longitude and latitude, your current speed and the status of your position, i.e. Fixed 3D or Fixed Invalid etc. The compass circle shows the satellites that the unit is receiving and the bar chart below shows the strength of the signal from each of these satellites. 5. Troubleshooting and maintenance This chapter gives solutions to common problems you may encounter. It also provides guidelines on taking care of your device.
5.2 Troubleshooting Power Problems Power does not turn on when using battery power The remaining battery power may be too low to run your device. Connect the AC adapter to your device and to AC power. Then, turn on your device. Troubleshooting and maintenance Screen Problems Screen is off . If the screen does not respond even after you press the power button, try the following in order until the problem is solved. . Connect the AC adapter to your device and to external AC power. . Reset your system.
. Reset your device before connecting the cable. Always disconnect your device before you restart your computer. Troubleshooting and maintenance GPS Problems When there are no valid signals available, consider the following: . Make sure that the GPS antenna has a clear view of the sky. . Note that the GPS reception can be affected by: √Bad weather √Dense overhead obstacles (e.g. trees and tall buildings) √Other wireless device in the car √Reflective car window tint Troubleshooting and maintenance 5.
. The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches. . Never clean your device with it powered on. Use a soft, lint-free cloth moistened with water to wipe the screen and the exterior of your device. . Do not use paper towels to clean the screen. .
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. .
Compliance with these directives implies conformity to the following European Standards: EN301489-1: Electronic compatibility and Radio spectrum Matters (ERM), ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN301489-3: Electronic compatibility and Radio spectrum Matters (ERM), ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies be
objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case. . Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging. . Do not use the adapter if the cord becomes damaged. . Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.
Main elements CPU Operating System Antenna GSM/GPRS Module Memory SIRF A4/500Mhz WIN CE 6.0 embedded Built-in GPS high sensitivity receiver (64 channels) Quad-Band 850/900/1800/1900 MHz GPRS multi-slot 10/8 64MB SDRAM Built-in/256MB FLASH EPROM 0/2/4GB internal Nandflash depending on Modell Display 7.0 inch color TFT touch screen (800x480) Weight 0.288kg Input Method Touch Expansion Slot microSD card Speaker Built-in 1.0 W loud speaker Headphone 3.
