Usermanual Hotline +49 (0) 511 - 270 496 90 www.a-rival.de * support@a-rival.de Dear Customer : Firstly, we really appreciate we can provide our best service to you! Please kindly read this instruction before you start using the product. This Instruction manual can explain product basic feature, can help you to well operate the product and understand all functions, corresponding operation message, suggestion, and cautions.
.Technical Specification ........................................................................................................................... 4 3. Outlook Preview ....................................................................................................................................... 5 3.1 Outlook Diagram ............................................................................................................................ 5 3.2 TF Card Plug and Unplug..........................
1. Reminder …Please do not disassemble the product personally, and avoid cleaning the product with ethyl alcohol, thinner, or benzene. Please contact us if any problem. …Minimum 12 hours charging for first three times charging. …Please do not place the product in hot, wet or dusty environment. Especially in summer, do not place it in a car with all windows closed. …Avoid droping or clashing the product and not shake the TFT screen voilently, or it may cause a damage or adnormal display to the screen.
2.Technical Specification 1 MID CPU Processor 800mHz Telechip Operation System Android 2.1 Harddisk 8GB Build in Memory 256MB Expansion Slot Micro-sd card Display 8.0 TFT Resistive Color Touch Panel Operation Touch Operation Pixel 800x600 Input Method Touch Panel Soft Keyboard Input Speaker Built-in Headphone Socket 3.5mm Plug (Adaptor) USB USB 2.0 Battery Rechargable Li-Ion Battery 4500mAh Product Dimension 210mm×159mm×14.7mm Weight 0.487kg Voltage USB 5.
3. Outlook Preview 3.
Remark : (1) LCD is Touch Panel, can operate click and drag function, Please do not use pen, pencil or other sharp tools to operate, it will damage LCD Touch Panel. (2) Please keep speaker hole clean, dust or others will block the sound. (3) MID back have installed WIFI Antenna under the BLACK cover, please DO NOT cover by Metal, it will affect the reception performance. 3.2 TF Card Plug and Unplug Please see below diagram, please make sure the insert direction is same.
3.4 Connection Adaptor Plug in the Connection Adaptor to Device Connection Socket, then you can plug in corresponding signal cable. 4. First attempt Button Definition -- Short press Pressing time less than 1.2 sec. -- Long press Pressing time more than 3 sec. Without specify mention in manual, means Short Press 4.1 Open MID 1.
4.2 Power Off the MID During MID is working, Long Press the Power Button, display will show Power Off Interface. Click “Power Off” button, will pop up another dialog (top right picture), Click “Normal” button, MID will shut down, several second later, device will power off. **** System will auto power off if the device is low battery 4.3 Key Lock Power Saving Mode During device is working, press the power off button, MID will key lock and screen lock power saving mode.
4.
While in charging, the Battery icon will be flashing and will become still & green once full charged. Back button” is equal to “Back button” of the machine. While in the application menu, clicking it to back the front menu. MID connects to the internet with the WIFI and will Show in the up corner when connecting successfully. 4.5 The real operating 1 In the main menu, you can switch the different main menu freely through sliding left and right by tapping and drawing on the screen.
Tapping other part of the screen, the menu screen will disappear. Click icon MID will get the Application Menu as below. Flapping the screen up and down, you can scan all application icon. Click icon again the Application Menu will be hidden.
4.6 Add icons to the main menu To meet different requirements, user can add or delete any common software icon freely in the main menu, and below will guide you how to do it: A. Press the icon long or pull it from the Application Menu to the main menu. B. Click icon of the menu window, MID will display the next menu. Select Shortcuts to enter into the next menu.
Select and press icon from menu, the icon will add to the main menu. Click icon to enter into the next menu. Select and press icon from menu, the icon will add to the main menu.
4.7 Switching the wallpaper As personalized feature, user can set their favourate graph, photos as the wallpaper. Click icon of the menu window, MID will display the left-down menu. Click icon and go to it is sub-menu (see graph R+U ), Flapping the screen, select the best picture and click icon, MID will go to the main menu and show the very wallpaper selected. *** in the sub-menu, click , MID will close the sub and go back to upper or last menu.
4.8 Arrange Shortcuts 4.
4.10 USB connection When connect the MID to the PC with USB, user will meet below Menu. Clicking “mount”, MID and PC can be operated synchronously. User can find the content of the MID and Micro card, copy and transmit. *** But after being mounted, part applications of MID will be effected; some of them will be unable to operate normally. 4.11 Reset While crashed or run unwell, user can reset the MID. Please use stylus and insert the nib to the reset hole.
5.0 Internet and Wifi Function 5.1 Network connection MID access to the internet with the WiFi built-in. In the main menu click icon or click the menu button of the machine to open it menu. Click icon to open the next menu. The right icon shows , it means that the option is in close position. The right icon shows , it means that the option is in open position.
Click “Wi-Fi settings” to enter into the next menu. Network notice that the right icon is , it means that automatic scanning is in the close position. Click Network notice, the right icon shows , it means that scanner is in the open position , the deive will seach automaticly and add the nearby WiFi network which can be connected. (3)Click one Network MID open the info menu (see the right-up picture). Click the blank and fill the password, click to connect.
5.2 UMTS connection The device can be connected via UMTS to the internet. You need a sim card . Turn the device off and slide the sim card in to the slot. Turn the device on. Click to enter the settings Click on „Settings“ Select „Wireless & networks“ Turn the WLAN connection off. The icon shows that the WLAN is turned off.
Select „Mobile networks“ and then „Access Point Names” Click and then select „New APN“ Enter the provider name.
In most cases, these two items are sufficient. Please ask your provider about any additional required information such as user, proxy or other. After that, you should see the left picture. Activate this connection by tap on the gray circle.
You can enabled the 3G option now and should see a icon with 3G and signal strength (right picture) 5.3 Internet Function You just need to turn on WiFi in the WiFi set-up , or choose this WiFi Router then connect it. When the status of WiFi set-up is open ( showing turn off WiFi ), the machine will search the WiFi router automaticly and then connect to it when the device is started up each time. Click the Note: if don’t see the from the main menu to get the keyboard.
Below: a. click the in the menu window to enter into the next menu. (1) Start: click and input the address. (2) Bookmark: click and set the web address as bookmark. (3) Window: click and minimize all opened web page. (4) Refresh: refresh the very opened page. (5) Next/Previous: move forward or backward. (6) More: Click more setting. 6. Basic Setting Clicking icon of the “Menu Window” into setting menu. 6.1 Opening Sound & display function menu.
• Silent mode: All sound will become silent except for Media and alarm. • Loudspeaker mode: you can use loudspeaker. •The volume of ring: you can set up the volume of ring. •The volume of media : •Brightness: Adjust the brightness of screen •Screen timeout: before turn off the machine automaticly , it will adjust to delay the turning off. There are 6 kind of time for your choose such as 15 seconds, 30 seconds,1 minute, 2 minutes, 10 minutes. 6.
• Unknown source: you can choose whether it is allowed to install non-market applications. • Quick start-up: set-up the keyboard shortcut in the running applications • Manage applications: Managing and deleting the installed applications • Explore: set up the explore option in the applications. 6.4 CD card and MID Save: Remove SD card to see the available memory space. Notes: please removing the SD card by the option delete the SD card safely in case of damaging the device by remove it directly. 6.
•Set up date and time: Enter into the interface of date settings to set up the date. • Select time zone : enter into the interface of choosing time zone to set up the time zone. • Set up time: Enter into the interface of time settings to set up the time. • Set up 24 hour formality : set up the formality of displaying time •Select the formality of showing date: you can choose different formality to show date.
6.6 Area and Text Set up the option area ( language and are), text typing and correct automaticly. •Select area : 54 kinds of language for your choose Android keyboard : Android keyboard settings --make sound when click -- Show capital letters automaticly --Show suggestions: show the suggestive word and type it out -- Auto-complete: complete space, point and insert focus words automaticly. • Dictionary of user : Add or delete words and sentences to the dictionary of user. 6.
6.7 Calibrate You can calibrate the touch screen if it is not responding accurately to your Taps. Tap and hold the centre of the target, the target moves to the position of left-up. When again tap and hold the centre of the target, the target moves the Next position of left-down. The target moves to five position (Left-up' left-down' right-up' right-down' Center) in order, forming a period.
7.2 Email Clicking icon of the “applicant function menu” to enter into Email function. After entering the Email address and password, you can login and send or receive Email messages. 7.3 Internet Browser Clicking icon of the “applicant function menu” to enter into Internet browser to browse web page. Under the status, click icon to shoot out it menu: -- Go: enter website by inputting address. -- Bookmark: add bookmark for the website. -- New window: open new web page. 7.
