Operation Manual

8
1.3 Using the TMC module（optional）
(see the first picture) - Make sure, the TMC
module is connected with the car-charger.
The cable of the TMC module ,must be
connected with your navigation-device.
(see the 2nd picture) - The TMC module is
connected between the navigation-device
and the suction-mount.
1.4 Using the Car Holder
CAUTION:
. Select an appropriate location for the car holder. Never place the holder where
the driver's field of vision is blocked.
. If the car's windshield is tinted with a reflective coating, an external antenna
(optional) may be needed to route the antenna to the top of the car through a
window. When closing the car window, be careful not to pinch the antenna
cable. (Cars with an anti-jam window design may automatically leave
adequate space as needed.)
The car holder consists of a bracket and a stand.
Use the car holder to fix your device in a
vehicle. Make sure that the GPS antenna has a
clear view of the sky. (See the document
supplied with the car holder for the installation
instruction.)
For initial positioning, remain at the same spot with a clear view of the sky. The
GPS may take a few minutes to find its current location initially.
NOTE: Depending upon the specific model purchased, the car holder supplied
with your device may not look exactly the same as the picture shown.
1.5 Connecting the Car Charger
The car charger supplies power to your device when you are using the device
in a car.