Owner's manual

A P Products GmbH A P Products Ltd. A P Products S.r.l.
Bäumlesweg 21 – 23 80 Cromwell Road Viale Abruzzi, 87
71093 Weil im Schönbuch Saffron Walden, CB11 4BE 20131 Milano
Germany Great Britain Italia
Tel: +49-7157-5348-0 Tel: +44-1799-526602 Tel: +39-02-29404697
Fax: +49-7157-5348-39 Fax: +44-1799-521408 Fax: +39-02-29523280
Web: www.ap-products.de Web: www.ap-products.co.uk Web: www.ap-products.it
E-mail: info@ap-products.de E-mail: info@ap-products.co.uk E-mail: info@ap-products.it
20/06/2008 12.23.00
A P Products GmbH
2,54 mm Male Headers
Series 295P
B
6,00 mm
2,54 mm
3,30 mm
7,5mm
(Typ,)
6,00 mm
2,54 mm
B
7,5mm
(Typ,)
5,84 mm
1,94 mm
1,94 mm
Ordering Information
9x9xxx-xx-xx-xx
Product Option: 1 Row Plating Options: Contact Quantity per Row Plating Suffix
2 = Standard Product 500 = Solder Plating 1 to 36 none = Standard Product
without Kinked Tail 550 = Selective Gold / Solder plating 10 = 0,25 µm sel. Au Plating
550 = all over Gold plating SnPb30 Solder Tails
R = Standard Product 15 = 0,25 µm sel. Au Plating
with Kinked Tail as 2 Row Plating Options: Pin Length Identifier with Sn100 Solder Tails
Board Retention Feature 510 = Solder Plating Please see table below 20 = 0,50 µm sel. Au Plating
560 = Selective Gold / Solder plating SnPb30 Solder Tails
3 = High Temperature Product 560 = all over Gold plating 25 = 0,76 µm sel. Au Plating
without Kinked Tail with Sn100 Solder Tails
3 Row Plating Options: 30 = 0,76 µm sel. Au Plating
K = High Temperature Product = Solder Plating SnPb30 Solder Tails
with Kinked Tail as = Selective Gold / Solder plating 35 = 0,76 µm sel. Au Plating
Board Retention Feature = all over Gold plating Sn100 Solder Tails
50 = Sn100 Solder Plating
Pin Length Identifier Table:
Indicator Dimension
B
(Solder Tail)
Dimension
Interface
01 3,26 mm
7,50 mm
Engineering Note:
Th
e information presented in this
datasheet is accurate to the best of
our knowledge.
Due to ongoing efforts to advance
design and material performance,
this information is subject to change
without notice.