Owner's manual

A P Products GmbH A P Products Ltd. A P Products S.r.l.
Bäumlesweg 21 – 23 80 Cromwell Road Viale Abruzzi, 87
71093 Weil im Schönbuch Saffron Walden, CB11 4BE 20131 Milano
Germany Great Britain Italia
Tel: +49-7157-5348-0 Tel: +44-1799-526602 Tel: +39-02-29404697
Fax: +49-7157-5348-39 Fax: +44-1799-521408 Fax: +39-02-29523280
Web: www.ap-products.de Web: www.ap-products.co.uk Web: www.ap-products.it
E-mail: info@ap-products.de E-mail: info@ap-products.co.uk E-mail: info@ap-products.it
20/06/2008 12.21.00
A P Products GmbH
2,54 mm Male Headers
Series 235L
D
B
6 mm
(Typ.)
C
6 mm
(Typ.)
C
2,50 mm
5,00 mm
D
B
Ordering Information
9x8xxx-xx-xx-xx
Product Option: 1 Row Plating Options: Contact Quantity per Row Plating Suffix
3 = High Temperature Product 835 = Solder Plating 1 to 36 none = Standard Product
without Kinked Tail 648 = Selective Gold / Solder plating 10 = 0,25 µm sel. Au Plating
648 = all over Gold plating SnPb30 Solder Tails
K = High Temperature Product 15 = 0,25 µm sel. Au Plating
with Kinked Tail as 2 Row Plating Options: Pin Length Identifier with Sn100 Solder Tails
Board Retention Feature 838 = Solder Plating Please see table below 20 = 0,50 µm sel. Au Plating
667 = Selective Gold / Solder plating SnPb30 Solder Tails
667 = all over Gold plating 25 = 0,76 µm sel. Au Plating
with Sn100 Solder Tails
30 = 0,76 µm sel. Au Plating
SnPb30 Solder Tails
35 = 0,76 µm sel. Au Plating
Sn100 Solder Tails
50 = Sn100 Solder Plating
Pin Length Identifier Table (1 Row):
Indicator Dimension
B
(Solder Tail)
Dimension
C
(Bend)
Dimension
D
(Distance to Board)
Dimension
Interface
01 2,84 mm
1,80 mm
1,20 mm
6,00 mm
10 3,60 mm
1,80 mm
1,20 mm
6,00 mm
11 4,50 mm
1,80 mm
1,20 mm
6,00 mm
02 10,50 mm
1,80 mm
1,20 mm
6,00 mm
03 15,54 mm
1,80 mm
1,20 mm
6,00 mm
04 5,76 mm
4,34 mm
1,20 mm
6,00 mm
12 6,56 mm
4,34 mm
1,20 mm
6,00 mm
13 7,36 mm
4,34 mm
1,20 mm
6,00 mm
07 8,13 mm
4,34 mm
1,20 mm
6,00 mm
05 13,21 mm
4,34 mm
1,20 mm
6,00 mm
08 15,76 mm
4,34 mm
1,20 mm
6,00 mm
06 18,26 mm
4,34 mm
1,20 mm
6,00 mm
09 20,76 mm
4,34 mm
1,20 mm
6,00 mm
Pin Length Identifier Table (2 Row):
Indicator Dimension
B
(Solder Tail)
Dimension
C
(Bend)
Dimension
D
(Distance to Board)
Dimension
Interface
01 2,84 mm
1,80 mm
1,20 mm
6,00 mm
04 3,60 mm
1,80 mm
1,20 mm
6,00 mm
05 4,50 mm
1,80 mm
1,20 mm
6,00 mm
02 10,50 mm
1,80 mm
1,20 mm
6,00 mm
03 15,54 mm
1,80 mm
1,20 mm
6,00 mm
Engineering Note:
The information presented in this
datasheet is accurate to the best of
our knowledge.
Due to on
going efforts to advance
design and material performance,
this information is subject to change
without notice.