Installation Instructions

Installation and Service Manual Upsilon-Series

3 Scopeofdelivery

The boiler will be delivered ready for use. The delivery package includes the following:

• Boiler and housing:

• Boiler pump(s);

• Cascade control system;

• Automatic air vent(s);

• Siphon;

• Lid ø100 air supply (with screw);

• PG cable glands;

• Suspension bracket;

• Mounting material consisting of plugs and screws;

• Installation and Service Manual;

• User manual;

Depending on the selected cascade systems, the following parts are supplied:

1. Pipe work headers for ow/return and gas

• DN65 or DN100 ow/return pipe work headers for 2 or 3 boilers with:

• Flanges, M12/16 bolts, nuts, spring washers and gaskets

• 35 mm blind covers for unused boiler connections

• DN50 or DN65 gas pipe work headers for 2 or 3 boilers with:

• Flanges, M12 bolts, nuts, spring washers and gaskets

• 1¼" blind covers for unused boiler connections

• M6x8x16 close tolerance bolts for fastening gas pipeline

• Adjustable feet M8x35

2. Boiler connection set

• Couplings and pipe branches

• Isolation valves

• Supply and drainage tap with T-piece;

3. Low velocity header

• DN65 or DN100 Low velocity header with:

• Adjustable feet, bolts, nuts, spring washers and gaskets

• Automatic air vent, sensor pocket for T10 and drain valve

4. Frame (if stand-alone)

• Assembly frame (for 1 boiler in line or 2 boilers back to back)

• I-column(s)

• L-column(s) (for back- to- back positioning)

• Adjustable feet, bolts, spring washers and nuts

5. Parts such as: Bus communication cable, insulation sets, common ow sensor T10, etc.