User guide

?
should not be used for drinking.
?A special branch circuit should be used for the water heater. Examine whether the electric
meter, circuit breaker and diameter of electric wire meets the requirement for rated
current of the water heater. If necessary, a qualified electrician should examine.
?This water heater should be installed at a dry place. Please never insert or pull out the
power plug with a wet hand or else electric shock, injury, etc. may be caused.
?Do not use the damaged electric wire aged, loose and unfixed power socket otherwise,
electric shock, short circuit, fire, etc. will be caused. Make sure that the power plug is
connected with the socket firmly.
A. O. Smith India Water Heating Pvt. Ltd. reserves all the rights to interpret the above
mentioned provisions.
Water discharged from the water heater (including high temperature heating water)
Caution: Failure to follow these instructions may lead to risk of fire and could cause
property damage and or personal injury or death.
Warning: Power-on and operation will be permitted only after reliable grounding is
provided for the power socket. The water heater is strictly forbidden for use in
circumstances where no safe grounding or well-drained floor drain is provided. In
the installation area, it should be ensured that the water leakage of the water
heater or joints may not cause damage to the articles in adjacent region or lower
portion of the building.
2
Note: A. O. Smith reserves the right to amend or modify the specifications and features at
any time, as and when required without any prior notification.