Installation Guide
21 Page
ELECTRICAL CONNECTIONS
Follow the electrical code requirements of the local authority having
jurisdiction. In the absence of such requirements, follow the current edition
of the National Electrical Code ANSI/NFPA 70 in the U.S. or the current
edition of CSA C22.1 Canadian Electrical Code Part 1 in Canada.
When servicing or replacing parts within the water heater, label all wires
prior to disconnection to facilitate an easy and error-free reconnection.
Wiring errors can cause improper and dangerous operation. Verify proper
operation after servicing.
Failure to observe these warnings could result in personal injury or loss of life.
WARNING
All concentric vent models come with a power plug.
1. The water heater requires 120 VAC, 60 Hz electrical power supply that is properly grounded.
A proper disconnect (i.e. on/off switch, power plug, etc.) controlling the main power to the water
heater must be provided for service reasons. (Must comply with local codes.)
2. The use of a surge protector is recommended in order to protect the unit from power surges.
Installaon
Installaon Manual