Operation Manual
13
User Manual Epsilon-Series
Adjustments
The boiler has a large number of settings options.
We advise you to contact your installer for adjus-
ting the boiler to the required settings.
Adjusting the ow water temperature (CH)
- Press the Mode key briey
(from the Technical reading).
The display will show PARA .
- Press the Step key once.
The display will show 1 85 .
- Press the + or the - key to alter the adjustments,
if necessary.
- Press the Store key to conrm the setting.
The display will ash once.
- Press the Mode key briey.
The display will show StbY for a short while
and will return to the Technical reading.
The ow water temperature that has been adjusted only applies to the central
heating and is independent of the hot water facility for the cylinder.