User guide

4
*Safety valve has been factory fit with the water heater and set at 0.8 MPa (8 Bar) rated pressure.
CAUTION
Do not tamper or detach the Safety Valve from the water heater.
WARNING
Part Description Model No.
1 Cold water inlet pipe with diffuser All Models
2 Hot water outlet pipe All Models
3 Safety Valve* All Models
4 Temperature Control Knob HSE-SBS-006/HSE-SBS-010
4A Wired Remote control HSE-SBS-015/HSE-SBS-025
5 Decorative Front Panel All Models
6 Blue Cap All Models
7 Red Cap All Models
8 Anode All Models
9 Heating Element All Models
10 Thermal Cut-out All Models
11 Thermostat HSE-SBS-006/HSE-SBS-010
12 Wall Mount Slot All Models
Figure 2
2kWC
kWh
HEATING
SET
ON/OFF
ENERGY
METER