User guide

16
Changing the Decorative Front Panel
Please follow the instructions as shown in (Fig. 28).
For HSE-SBS-006 and HSE-SBS-010 models
Figure 28
1. Pull out the Knob. 2. Unscrew the screw on the
Decorative Front Panel.
3. Remove the Decorative
Front Panel to change.
Please follow the instructions as shown in (Fig. 29).
For HSE-SBS-015 and HSE-SBS-025 models
Figure 29
1. Remove the cap using
the flat screw driver.
2. Unscrew the screw on the
Decorative Front Panel.
3. Remove the Decorative
Front Panel to change.
 Please ensure to switch off the power supply while changing the Decorative Front
Panel and pull out the power plug from the socket.
 An insulation layer is provided below the front panel which should not be replaced.
 While changing the front panel ensure that, none of the internal components are
damaged or removed.
WARNING