Specifications

ptg
83
Editing Segments in the Timeline Using Segment Mode
3. Press Delete to extract or lift the selected material (depending on
which Segment mode button you selected).
4. Click the Segment mode button again to deselect it.
Using Add Edits to Define Segments
Repositioning or removing material in Segment mode will allow you to
affect only whole segments, not portions of segments. However, the Add
Edit function allows you to add an edit point to divide a segment in the
Timeline, thereby permitting you to remove any portion of a segment.
To use the Add Edit function:
1. Place the blue position indicator in the sequence where you want to
add an edit point.
2. Select the tracks to which you want to add the edit.
3. In the toolbar above the Timeline, click the Add Edit button.
An edit point is added to all selected tracks.
The segment has been divided at the
point where the Add Edit was placed
Notice that the unselected
tracks remain unaffected
To remove Add Edits:
1. Select only the tracks with the Add Edits.
2. Mark an IN and OUT around the area with the edits that you want to
remove, and select Clip > Remove Match Frame Edits.
NOTE Yo u c a n r e mo ve
Add Edits only if the
clips on each side of
the Add Edit are in the
same state (such as
with no effects or audio
changes). If not, you’ll
see a red equal (=) sign
in the Add Edit.
Download from www.wowebook.com