Specifications

ptg
61
Removing Material from a Sequence
To lift or extract material from the sequence:
1. Select the appropriate record tracks.
2. Mark the portion to be removed by doing one of the following:
 Mark an IN and OUT at the start and end of the material that you
want to lift or extract. (The marks don’t have to coincide with edit
points, although they often will.)
 Click the Mark Clip button (or press T) to quickly select an entire
clip for removal. (You can find the Mark Clip button below the
Record monitor.) Based on the record tracks you have selected
and the location of the blue position indicator, the Mark Clip func-
tion automatically finds the IN and OUT points of a sequence clip.
3. Lift or extract by doing one of the following:
 Click the Lift button below the Record monitor, or press the Z key,
to lift the selected material from the sequence and leave black or
silence in the gap.
 Click the Extract button below the Record monitor, or press the X
key, to remove the selected material and close the gap.
Download from www.wowebook.com