Specifications

ptg
350
Delivering the Finished Work
 Select Entire Sequence if you want the system to ignore any IN or
OUT points and play the entire sequence from start to finish; dese-
lect Entire Sequence if you have established an IN point, an OUT
point, or both points to record a portion of the sequence.
 Select Digital Cut Safe Mode (selected by default) to allow
Media Composer to notify you of conditions that might cause
dropped frames.
 Select Stop on Dropped Frames if you want Media Composer to
stop the digital cut if it detects a dropped frame during output.
 Select Add Black at Tail, and enter a duration to add black at the
end of the sequence during the digital cut.
5. Click the Deck Selection menu, and select a deck.
6. In the Deck Control options area, select Remote.
7. Click the menu, and select Insert Edit, Assemble Edit, or Crash Record.
8. Click the menu in the Deck Control options area, and select an option
to indicate where to start recording on the tape.
 Sequence Time: Starts the recording at a timecode on the tape
that matches the starting timecode of the sequence. If you want to
record several sequences to tape, this option requires resetting the
start timecode on each sequence to match appropriate IN points
on the tape.
 Record Deck Time: Ignores the sequence timecode and starts
the recording wherever the record deck is currently cued. You
can change the start timecode to match the record tape using the
Sequence Report command.
 Mark In Time: Ignores the sequence timecode. You can establish a
specific IN point on the record tape by cueing and marking with the
deck controls.
 Ignore Time: Ignores the starting timecode and starts recording at
the current location.
NOTE Digital Cut
Safe Mode analyzes
and identifies real-time
effects that might cause
dropped frames during
the digital cut and lets
you render them. It also
identifies HD clips in
an SD sequence and
gives you the opportunity
to transcode the clips.
When these operations
are completed, Media
Composer automatically
performs the digital cut.
NOTE The menu in the
Deck Control options
area appears only if you
have enabled Assemble
Edit and Crash Record
in Settings > Deck
Preferences.
Download from www.wowebook.com