Specifications

ptg
287
Capturing Footage
3. When the tape name appears in the list, select it by clicking the black
square to the left of the tape name.
4. Click OK.
The tape name appears in the Source Tape display button in the
Capture tool.
Capturing Footage
When you’ve set all your capturing parameters, you can begin capturing clips.
Yo u c an p er fo rm a ca pt u re i n s ev er a l w ay s :

Capture from IN to OUT

Capture on-the-fly

Log and Batch Capture

Capture from a non-timecode source
Capturing from IN to OUT
This method enables you to play the tape and mark an IN and OUT before
capturing.
To capture from I N to OUT:
1. In the Capture tool, set up capture parameters.
NOTE When creating a
tape name, use a unique
name for each tape, and
write the same name on
the physical tape and on
the tape box. The flex-
ibility of Media Composer
relies in part on its ability
to correctly associate
clips with their physical
tapes. The system can-
not distinguish between
two tapes with the
same name.
A typical naming con-
vention is “001 [Project
Name],” “002 [Project
Name],” and so on. So,
the first tape of the
“Urban Nutcracker” proj-
ect would be “001 Urban
Nutcracker.”
Download from www.wowebook.com