Specifications

ptg
282
Capturing Tape-Based Media
Yo ur s el ec t io n of aud io inp ut so ur c e ( loc at ed w it hin th e I npu t t a b)
depends on how your deck is connected to your system.
Some options in the Audio Project Settings dialog box depend on the
audio configuration of your system, so your system might not contain some
features and hardware seen here.
Working with the Capture Tool
The Capture tool provides all the controls you need to digitally capture
your footage. You will set up several options here, but first you should
select the bin that will contain your captured footage.
To set your capture bin:
1. Open the bin where you want to store your clips.
2. With that bin highlighted, select Bin > Go To Capture Mode, or press
Ctrl+B (Windows) or Command+B (Macintosh).
The screen displays the Capture tool and the open bin.
NOTE The values you
set in the Audio Project
Settings dialog box are
saved as project set-
tings. You can also save
the settings in the Audio
Project Settings dialog
box as site settings so
that all of your projects
open with the same
audio settings. For more
information, see the dis-
cussion of site settings in
Chapter 6.
NOTE To op en th e
Capture tool, you can
also select Tools >
Capture, select Toolset >
Capture, or press
Ctrl+7 (Windows)
or Command+7
(Macintosh). When you
use one of these options,
you have to manually
select your capture bin
within the Capture tool.
Download from www.wowebook.com